The GreenVisuaLED mechanical timer automates your light cycles reliably. No electronics, no complex setup: turn the dial, press the pins, done.
Garantie 3 ans · SAV basé en France
A consistent light cycle matters as much as your lamp's power. This mechanical timer sets that cycle once — no battery, no electronic failure.
96 fifteen-minute slots cover any horticultural cycle — from 18/6 to 12/12 — with no guesswork.
No electronics at risk of failure. The dial turns, the cycle is maintained — even in a humid growing environment.
Compatible with GVL SPOT 30 to 200 W, fans, extractors, and pumps. Multiple devices in parallel within the 16 A limit.
| Specification | Value |
|---|---|
| Type | Mechanical pin dial |
| Programming range | 24 hours |
| Minimum interval | 15 min |
| Available slots | 96 per 24h cycle |
| Max power | 3,680 W |
| Max current | 16 A |
| Manual mode | ON / Timer / OFF switch |
| Recommended use | Lighting, extractor, fan, pump |
Turn the dial clockwise to the current time. Press down the pins for the slots you want powered on (1 pin = 15 min). Set the switch to Timer position.
This mechanical timer has no memory or battery. After a brief cut the dial resumes at the correct time. If there is a significant offset, simply recalibrate the dial to the current time.
Yes, using a power strip plugged into the timer. The combined limit is 3,680 W / 16 A for all connected devices.
Specific References
Commande validée avant 14h expédiée le jour même (jours ouvrés). Livraison estimée sous 24 à 48h en France métropolitaine.
Livraison offerte dès 50 € d'achat.
Garantie 3 ans sur nos luminaires horticoles. Retour possible sous 14 jours, produit non installé.
Explore the accessories associated with this product. Check the options and choose quantities to suit your installation.
Notre bureau d'études France vous accompagne depuis 2009 : devis volume, fiches techniques, dimensionnement de votre installation.
The GreenVisuaLED mechanical timer automates your light cycles reliably. No electronics, no complex setup: turn the dial, press the pins, done.
check_circle
check_circle